Some basic rules first:
- The Master server works best on a dedicated machine, preferably with a SSD drive.
- The Chunk server works best with at least one dedicated disk.
- Do not put a metalogger on the same machine as the master server, it doesn’t make your metadata any safer. Metaloggers are completely optional, though ;) It is fine, however, to install a metalogger along with a chunk server
- Increase your data safety by using shadow master servers
There are a range of settings that must be done on every server before we start working on the LizardFS configuration itself.
- adjust network settings
- adjust kernel settings
Basic operating system settings for LizardFS¶
LizardFS runs on many UNIX and UNIX like operating systems. We will be concentrating here on Debian and RH like systems to keep things simple. For other OSes, please consult the LizardFS’ers CookBook.
The /etc/hosts file¶
Since LizardFS is a network based File system, your network setup is crucial, especially the name resolution service which helps computers in the network find each other. There are two basic ways that computers find each other by name: static entries in the /etc/hosts file or the DNS System.
The DNS system provides a central database that resolves names to their respective IP addresses. In many environments DNS is either automatic and linked to other services (Active Directory, DHCP, etc ..) so that we strongly recommend to use the /etc/hosts file to resolve between the LizardFS cluster components. This will keep the cluster from loosing Data in case somebody changes something in the DNS service. It involves some additional work from the Administrator responsible for the LizardFS cluster to keep the files up to date, but will safeguard you from storage failure and data loss in case something happens to the DNS system.
The /etc/hosts file has not changed in the last 5 decades and is basically the same on all operating systems. it’s structure is:
<ip-address> <hostname> <alias>
one line per IP address.
127.0.0.1 localhost 192.168.16.100 mfsmaster 192.168.16.101 shadowmaster 192.168.16.10 chunkserver1 metalogger 192.168.16.11 chunkserver2 cgiserver 192.168.16.12 chunkserver3
In this example your Master is on 192.168.16.100 and your Shadow Master on 192.168.16.101. Chunkserver1 also provides the metalogger and is located at 192.168.16.10. Chunkserver2 also provides the cgi web interface and is located at 192.168.16.11. Chunkserver3 is at 192.168.11.12.
The ntpd time service¶
File systems for LizardFS servers¶
Due to its speed and stability we recommend the XFS or ZFS file systems on production servers. XFS was developed for Silicon Graphics, and is a mature and stable file system. ZFS was developed by SUN Microsystems and is used for heavy duty storage by Systems from numerous Storage System Vendors.
For the Master servers¶
The Master keeps all of his records in memory but does frequent backups to drives which should therefore be very fast, but do not have to be very large. A standard 250G SSD should suffice. As a file system we would recommend something fast, like XFS. Do not use a HW RAID controller to mirror your drives, SSDs usually have identical lifespan so block level mirroring would just lead to two dead SSDs instead of one. An alternative would be ZFS mirroring which is not low level but data based and does not always write the same block to both devices to the same position.
For the chunkservers¶
If you are using XFS as the file system for the chunkserver directories, we recommend the following mount options:
This disables unneeded features from the mount which gives a slight performance increase especially in case of many chunks. It also increases the size of the directories gives LizardFS more space in to put its data.
Depending on the hardware you use and if you are utilizing caching RAID controllers, it could make sense to adjust the scheduler on your file systems. How you do a that is documented here:
Probably you will want the deadline scheduler but your mileage may vary.
Why you should do that and what performance gains you may achieve can be found here:
If you would like to use the high performance ZFS file system, please check the LizardFS’ers CookBook for further information.
Configuring your Master¶
The master server is the heart of the LizardFS ecosystem. It keeps all meta information about every file, every chunk and every slice if in ec mode. It knows what is where and how to find it. It is also responsible to organize geo replication and topology and fix the effects of broken drives and chunkservers.
The metadata database¶
For the master to work, you need to first give it a file where it will keep its metadata database. The default location, which can be adjusted in the mfsmaster.cfg(5) file, is:
There is an empty metadata file available which you can use to create a new one. If you want to use the default location, just issue a:
$ cp /var/lib/mfs/metadata.mfs.empty /var/lib/mfs/metadata.mfs
to copy the empty template into the default location and create a new database.
Now that you have a metadata database, you need to provide your master server with the required information for operation.
The mfsmaster.cfg file¶
In the mfsmaster.cfg file, there are a lot of settings for advanced usage which we will get into in the Advanced configuration Guide. For a basic setup the things that are important are:
Current personality of this instance of the metadata server. Valid values are master, shadow and ha-cluster-managed. If the installation is managed by an HA cluster the only valid value is ha-cluster-managed, otherwise the only valid values are master and shadow, in which case only one metadata server in LizardFS shall have master personality.PERSONALITY = master
means that this instance of metadata server acts as main metadata server governing all file system metadata modifications.PERSONALITY = shadow
means that this instance of the metadata server acts as backup metadata server ready for immediate deployment as the new master in case of a failure of the current master.
Metadata server personality can be changed at any moment as long as one changes personality from shadow to master, changing personality the other way around is forbidden.PERSONALITY = ha-cluster-managed
means that this instance is managed by a HA cluster, server runs in shadow mode as long as its not remotely promoted to master. For details on running LizardFS with HA Master please refer to Deploying LizardFS as a HA Cluster .
The addresses your master server is to listen on, if not all:
ATOML_LISTEN_HOST # IP address to listen on for meta logger connections (* means any) MATOCS_LISTEN_HOST # IP address to listen on for chunk server connections (* means any) MATOTS_LISTEN_HOST # IP address to listen on for tape server connections (* means any) MATOCL_LISTEN_HOST # IP address to listen on for client (mount) connections (* means any)
The ports your master server is supposed to listen on, if not the default ones:
MATOML_LISTEN_PORT # port to listen on for metalogger connections (default is 9419) MATOCS_LISTEN_PORT # port to listen on for chunkserver connections (default is 9420) MATOCL_LISTEN_PORT # port to listen on for client (mount) connections (default is 9421) MATOTS_LISTEN_PORT # Port to listen on for tape server connections (default is 9424)
The user and group you would like your master to run as (default is mfs):
WORKING_USER # user to run daemon as WORKING_GROUP # group to run daemon as (optional - if empty then the default user group will be used)
Where to store metadata and lock files:
DATA_PATH # where to store metadata files and lock file
Should the access time for every file be recorded or not ?
NO_ATIME # when this option is set to 1 inode access time is not updated on every # # access, otherwise (when set to 0) it is updated (default is 0)
All other settings should be left alone for a basic system.
Layout, access rights and other options¶
LizardFS creates one big namespace. For fine tuned access you should create entries here for subdirectories and assign those to groups to have different clients access only different parts of the tree.
This file contains all the settings required to create a LizardFS namespace and set its access rights and network permissions. Its format is pretty simple:
ADDRESS DIRECTORY [OPTIONS]
Basically you define which network address or address range has access to which directory plus options for that access.
The address scheme looks like the following:
|n.n.n.n||single IP address|
|n.n.n.n/b||IP class specified by network address and bits number|
|n.n.n.n/m.m.m.m||IP class specified by network address and mask|
|f.f.f.f-t.t.t.t||IP range specified by from-to addresses (inclusive)|
Your LizardFS namespace is a tree, starting with the root entry /. So in the directory field you can specify the whole namespace, /, or subdirectories like: /home or /vm1. The special value . represents the meta file system, which is described in Mounting the meta data . You can specify different access rights, options, passwords and user mappings for every single directory and split your namespace utilizing those options into multiple sub namespaces if required. Check out the examples for how different directories can be set to different options.
To give you maximum flexibility LizardFS provides a range of mount options so you can fine tune settings for every piece of your namespace.
None of them are required. If you do not provide any options, the default set of:
will be used.
The options are:
- ro, readonly
- export tree in read-only mode (default)
- rw, readwrite
- export tree in read-write mode
- disable testing of group access at mfsmaster level (it’s still done at mfsmount level) - in this case “group” and “other” permissions are logically added; needed for supplementary groups to work. (mfsmaster only receives information about the users primary group)
- allows reconnecting of already authenticated client from any IP address (the default is to check the IP address on reconnect)
- maps root (uid=0) accesses to the given user and group (similarly to maproot option in NFS mounts); USER and GROUP can be given either as name or number; if no group is specified, USERs primary group is used. Names are resolved on mfsmaster side (see note below).
- like above but maps all non privileged users (uid!=0) accesses to a given user and group (see notes below).
- rejects access from clients older than specified
- mingoal=N, maxgoal=N
- specifies range in which goal can be set by users
- mintrashtime=TDUR, *maxtrashtime=TDUR
- specifies range in which trashtime can be set by users. See Trash directory
- password=PASS, md5pass=MD5
- requires password authentication in order to access specified resource
- allows to mount any subdirectory of the specified directory (similarly to NFS)
- allows non-root users to use file system mounted in the meta mode (option available only in this mode). See Mounting the meta data .
* / ro # Give everybody access to the whole namespace but read-only. Subdirs can # not be mounted directly and must be accessed from /. 192.168.1.0/24 / rw # Allow 192.168.1.1 - 192.168.1.254 to access the whole namespace read/write. 192.168.1.0/24 / rw,alldirs,maproot=0,password=passcode # Allow 192.168.1.1 - 192.168.1.254 to access the whole namespace read/write # with the password *passcode* and map the root user to the UID *0*. 10.0.0.0-10.0.0.5 /test rw,maproot=nobody,password=test # Allow 10.0.0.0 - 10.0.0.5 to access the directory /test except for its # subdirectories in a read/write fashion using the password *test*. Map all # accesses by the root user to the user *nobody*. 10.1.0.0/255.255.0.0 /public rw,mapall=1000:1000 # Give access to the /public directory to the network 10.1.0.0/255.255.0.0 # in a read/write fashion and map everybody to the UID *1000* and GID *1000*. 10.2.0.0/16 / rw,alldirs,maproot=0,mintrashtime=2h30m,maxtrashtime=2w # Give access to the whole namespace to the 10.2.0.0/16 network in a # read/write fashion. Also allow subdirectories to be mounted directly by # those clients. # Map the root user to UID *0*. Allow users to set the trashtime (time when # files in the trash get auto pruned) between # 2h30m and 2 weeks.
Utilizing all of these options you will be able to do quite flexible setups, like optimizing for virtualization as described in our Cookbook at Using LizardFS for Virtualization Farms .
Now that you know how to setup your namespace, the next step would be to set custom goals/replication modes, described in Configuring Replication Modes and QoS/IO Limits, described in the Configuring QoS chapter.
Network awareness / topology are further advanced topics, especially required for geo replication. A description of how to set them up can be found here Configuring rack awareness (network topology) .
Configuring your shadow master¶
Your shadow master is configured in nearly the same way as your Master. Since it is supposed to take over the functionality of the Master in case of a failure of the Master, it has to keep its meta database in sync and besides that have all the configurations of the master server mirrored.
Settings specific to the Shadow master:
In the mfsmaster.cfg file:
# Set the personality to be that of a Shadow master: PERSONALITY = shadow # Set the address where the meta database is synced from: MASTER_HOST = 10.0.10.230
The files mfsexports.cfg, mfsgoals.cfg and mfstopology.cfg must be synchronized with the master server.
Configuring your chunk servers¶
Your chunkservers are pretty simple to set up. Usually, if your /etc/hosts files are setup correctly with the address of the master server and you do not require labeling (Labeling your chunk server), the mfschunkserver.cfg file can stay as it is. If you require to lock down the master server address, adjust the following line:
MASTER_HOST = 10.0.10.230
to lock down the master server to the 10.0.10.230 address.
Now you need to specify where the chunkserver process will keep the actual data. This is done in the mfshdd.cfg file. You specify directories with their full path, one per line.
# use directory '/mnt/hd1' with default options: /mnt/hd1 # use directory '/mnt/hd2', but replicate all data from it: */mnt/hd2
The settings always assume that the directory is a dedicated device, so a HDD, a Raidset or a SSD and bases it’s space calculation on that.
Once this is setup, your chunkserver is ready and actively taking part in your LizardFS.
To remove a directory from being used by LizardFS, just add a * to the beginning of the line in mfshdd.cfg:
# use directory '/mnt/hd2', but replicate all data from it: */mnt/hd2
LizardFS will replicate all the data from it somewhere else. Once you see in the web interface that all data has been safely copied away, you can update the file and remove the line and than remove the device associated with it from your chunkserver.
Configuring the Metalogger¶
The metalogger is used for disaster recovery should the master and shadow servers fail. The meta database can be rebuild from them. The setup is straightforward. You basically do not need to setup anything if your /etc/hosts is setup accordingly, otherwise you need to set the following in your mfsmetalogger.cfg file:
MASTER_HOST # address of LizardFS master host to connect with (default is mfsmaster) MASTER_PORT # number of LizardFS master port to connect with (default is 9419)
and you are ready to go.
Configuring the Web Interface¶
The lizardfs cgiserver does not require much configuration. After the installation either follow the example installation and just add an entry for mfsmaster to your /etc/hosts file. If you do not call your master mfsmaster, you can always define which mater to connect to via the URL.
Would open the we interface that is running on host 22.214.171.124 and connect it to the lizardFS master server running on 192.168.99.100.
Labeling your chunk server¶
To be able to setup which goals are going to be performed on which chunk servers, you need to be able to identify them in your goal definition. To achieve this, we use labels.
The label for the Chunkservers is set in the mfschunkserver.cfg file.
LABEL = ssd
After changing the configuration you must reload the chunkserver:
$ mfschunkserver -c path/to/config reload
If there is no LABEL entry in the config, the chunk server has a default label of “_” (i.e. wild card), which has a special meaning when defining goals and means “any chunk server”.
Multiple chunk servers can have the same label, than they are basically a group of chunk servers where you can use the label to write a chunk or a piece of XOR or EC set to “any” chunk server in that group.
Show labels of connected chunk servers¶
From the command line:
$ lizardfs-admin list-chunkservers <master ip> <master port>
Via the cgi (web interface):
In the ‘Servers’ tab in the table ‘Chunk Servers’ there is a column ‘label’ where labels of the chunkservers are displayed.