- Check if your nodes are all reachable by ip address as well as by hostname
- Check if your network has the right throughput
- Check if your disks are all working and do not repport errors
- Check your Chunkservers for:
- Broken Disks
- Slow Disks
- permissions on your directories (the user which is running the chunkserver must be the owner of the directories)
- network performance to other chunkserver
- network performance to master server
- network performance to clients
- Check your license files for the correct name and location
- Check your log files for errors. Lizardfs is very talkative and reports a lot.
Check the speed of your network interface¶
Veryfying what your network interface is set to is pretty simple on linux, you can just use the ethtool program to tell you what your interface is actualy set to:
# ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on MDI-X: on (auto) Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000007 (7) drv probe link Link detected: yes
As you can see, the interface report a speed of 100Mb/s. It has Auto-negotiation enabled so is most probably connected to a 10Mb/s switchport.
Checking the throughput of your network¶
The best tool to verify if your network throughput is according to what you think it is would be the iperf tool. iperf allows you to verify the throughput between two machines. It is available for linux, windows, macOS, FreeBSD and all other posix compliant systems and most mobile phone OSes and is very easy to use.
For more information about iperf, please check out https://iperf.fr/ .